ATX power supply tester LCD chassis power tester computer host power tool

Description

Product Related
Brief Introduction of LCD Power Tester:
1: Support 20Pin and 24Pin ATX interfaces
2: Support SATA interface
3. Support 4Pin and 8Pin interfaces
4: Support PCI-E graphics card 6Pin interface
5: Support floppy drive interface 6: Support ATE hard disk interface
7: The test voltage has +3.3V, -12V, +5VSB, +12V1,+12V2,+ 5V and PG time values
Raw materials: aluminum alloy. Size: 126x64x18.5mm. Weight: 120g
Features: LCD displays output voltage, PG and other parameters, when the parameters exceed the normal value, the buzzer will issue a warning sound, and the corresponding value will blink.
Overview: THE LIQUID crystal display power tester is a powerful power testing equipment. The power tester can simply and intuitively know whether the output of the power supply is normal or not by connecting the ATX connector of the power supply. Can detect ATX, BTX, ITX, TFX computer power supply, and can display each voltage and PG value of liquid crystal, quickly detect the performance of computer power supply.
Third generation LCD LCD display, output voltage directly see
The voltage of each set of power supply can be measured at 3.3V/+5V/+12V/-12V/SB+5V/PG
If there is a bad will have a buzzer automatic alarm.
Also can measure the output wire P4/P6/P8/SATA/IDE, DIE/SATA/P6/P8 external is the lamp display, no LCD voltage. Only 24PIN or 20PIN will have LCD voltage.
Small and practical power tester now more and more power output groups, as long as one of the problems, the computer system hardware may not work properly or even burn out. To measure whether the output voltage of the power supply is stable, players usually use a multimeter. But it's a bit of a hassle for the average user. In view of the fact that the power supply market cannot judge the pros and cons of the power supply, the portable computer power tester developed by us has the characteristics of LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, compact and beautiful appearance, and many test functions. Is a fast detection of PC power. It is your most reliable helper. There are more and more clusters, and if there is a problem along the way, the hardware of the computer system may not work properly or even burn out the relevant accessories. To measure whether the power output voltage output is stable, usually players will use a multimeter, but for the general user or trouble. This power tester only needs to connect the ATX connector of the power supply to know whether the output of each power supply is normal or not. The Power Star Power Tester is a powerful power test device that can detect the power supply of ATX, BTX, ITX and TFX computers. It can also display the voltage and PG values of each group by liquid crystal display to quickly detect the power supply of computers.
◆ Support 20Pin, 24Pin ATX power supply
◆ Support SATA power supply
◆ Support P4 4Pin, 8Pin interface
◆ Support PCI-E graphics card 6Pin power interface
◆ Support MOLex/Xeco power interface
◆ Support floppy drive power interface
Support standard 4Pin power interface SATA interface
◆ The test voltage is +3.3V, -12V, +5VSB, +12V1, +12V2, +5V
◆ Raw materials: aluminum
◆ Size: 89x63.7x17.5mm
◆ Features: PG automatic alarm, LCD display each voltage situation
Operation method:
A. Insert the power 20PIN or 24PIN and P4,P6 or P8 plugs into the corresponding positions of the power tester. (If you plug in 20PIN or 24PIN interface tester to alarm and display LL, you need to plug in 4P! Please make sure the 4PS are inserted in the 4P position!)
B. Turn on the power and make two startup sounds of "didi" at the same time. If the values of each group do not flicker, it means that the power input is normal.
C. If the voltage signal of some circuit is not detected (such as 20PIN or 24PIN connector) or the detected voltage is beyond the normal range, the buzzer will send out a "drop" warning sound for a long time, and the corresponding voltage or PG value is displayed as flashing state, then this power supply is the fault power supply!
Specifications:
Voltage input: 20/40PIN (ATX power supply)
Voltage detection: + 12V-12V + 5V-5V +3.3V 5VSB 12VPG
Connect port: Floppy HDD COROM SATA 4PIN (P4) 8PIN (Dual-CPU) 6PIN (PCI-E)
Note: According to some customers, the +3.3V lamp of SATA interface tester is not on, because the SATA interface of power supply on the market now has 4 and 5 wires. First of all, make sure your power SATA interface is 4 wires or 5 wires. If it is 4 wires, there is no +3.3V output. If it is 5 wires, there is +3.3V output.
Special reminder: do not hot plug and plug when using! This is common sense!!
Any voltage of the power supply or PG problem will alarm and display the voltage value, which solves the problem that the first-generation tester can't test out a certain group of low voltage! Very convenient, is the power supply sales staff and businesses rare detection tools!
Shipping
Our shipping cost includes the cost of the packaging box, the materials used to protect the product and/or all other materials used during the processing of the product, residential shipping fee, and handling fee.
Payment
Before you bid, we want to let you know that we accept
Paypal Only
. Please pay for it as soon as possible after you win the bid. We would send it out in the current work day, or the next work day.
Return Policy
We guarantee refund cash in 30 days. But the buyer should afford the shipping charges.
Our Guarantee
100%
brand new
100%
speed shipment
100%
customer satisfaction
Welcome to our Store