HANGKAI 1200W 48V Electric Outboard Motor ishing Boat Short Shaft Engine

Description

Specification Power: 1200W Rated Voltage: 48V Rated Current: 25A Rated Speed: 3000rpm No-load Speed: 4000 rpm Process: Spray Painting Gear Ratio: 2.08(27:13) Control System: Tiller Control Max. Speed: 15km/h/9.3mph Motor Type: Pure Copper Brushless Motor Reverse Gear: Yes Thrust: 1500kg/3307lbs, Speed 5-8 km/hour ( According to the Environment, Water, Boat load will be Different ) Recommended Battery: 1*48V/4*12V (40Ah Capacity can be Used for About 2 Hours, the Longer the Endurance, the Slower the Speed) Length of Suitable Ships: Less than 5m/16.4ft Package Included 1* Electric Outboard Motor 1* Propeller 1*English User Manual 2*Keys All Accessories Needed for Installation
HANGKAI 1200W 48V Electric Outboard Motor ishing Boat Short Shaft Engine
Specification
Model: Dd-48v-1200w
Power: 1200w
Rated Voltage: 48v
Rated Current: 25a
Rated Speed: 3000rpm
No-load Speed: 4000 Rpm
Process: Spray Painting
Gear Ratio: 2.08(27:13)
Control System: Tiller Control
Max. Speed: 15km/H/9.3mph
Motor Type: Pure Copper
Brushless
Motor
Reverse Gear: Yes
Thrust: 1500kg/3307lbs, Speed 5-8 Km/Hour ( According to the Environment, Water, Boat Load Will Be Different )
Recommended Battery: 1*48v/4*12v (40ah Capacity Can Be Used for About 2 Hours, the Longer the Endurance, the Slower the Speed)
Propeller Model(in): 7-1/4x5-a(the Size of the Propeller Is 7.25 Inches/18.4cm, and the Propelling Distance of the Propeller Is 5 Inches/12.7cm After One Revolution)
Length of Suitable Ships: less than 5m/16.4ft
Package Size: 95*42*29cm/37.4*16.53*11.41in
Product Size: 92*36.5*22cm/36.22*14.37*8.66in
Gross Weight: 14kg/30.86lbs
Net Weight: 12kg/26.45lbs
Tail Plate Height: 42cm/16.53in(Short Shaft)
Stern Plate Adapter Height: 40cm/15.74in
Package Included
1* Electric Outboard Motor
1* Propeller
1*English User Manual
2*Keys
All Accessories Needed for In
stallation
Description
With a Huge Thrust, a Super Strong Shaft, and Precise Speed Control, the Outboard Engine Is a Good Helper for Your Water Work. Its
Brushless
Pure Copper Motor and Flexible Steering Let You Sneak up on Fish, Outdoor Adventure, Etc. with the Best Speed and Low Noise.
Key Features
Build to Last
: the Exquisite Painting Process and Aluminum Alloy Improve the Corrosion
Resistance
and Wear
Resistance
of the Product(Able to Withstand Fresh and Saltwater Environments), Which Makes It Can Serve You for a Long Time.
Easy to Install
: the Simple Structure and Lightweight (26.45 Lbs) Allows You to Easily Install Without Any Tools.
Strong Power
: 1200w Pure Copper
Brushless
Motor Provides Strong Power to It.
Environmentally Friendly
: the Electrically Powered Outboard Eliminates Exhaust Pollution from Gasoline. and the Pure Copper
Brushless
Motor Produces less Wear and Noise, Creating a Smoother User Experience for You.
Flexible Control
: Having
Step-less
Speed Change and Constant Speed Function in Reverse and Forward Gears Allows You to Enjoy Different Cruising Experiences. the 180°Rotatable Stand and Omnidirectional Swivel Joystick Allow a More Flexible Operation to Meet Different Needs.
High Efficiency and Energy-saving
: Compared with t
he Brush Mo
tor, the
Brushless
Motor Is More Efficient and Easy to Maintain Without Replacing the Carbon Brush, Which Saves Electricity and Time.
Powerful
Thrust
:
High-quality Aluminum Alloy Material, Powerful Pure Copper Motor and Stable Structure Provide an Excellent
Thrust
of
3307lbs
for You to Use with Peace of Mind.
Customer Service
:
We Aim to Provide Quality Products and Services. If You Have Any Problems, Please Feel Free to Contact Us. We Will Reply and Solve the Problem for You As Soon As Possible.
Details
Key Switch
: You Can Turn the Key to Control the Opening, Closing, and Stopping of the Outboard Engine, Which Is Very Convenient.
Anti-winding
Propeller
: the Three-blade
Anti-winding
Propeller Adopts a Bionic Fluid Dynamics Design to Prevent Winding, Reduce Underwater
Resistance
and Improve Propulsion Efficiency.
Ergonomic Handle
: Its Handle Conforms to the Ergonomic Design, Making It Comfortable to Hold. the Gear Buttons at the Handle Are Designed to Facilitate Your Operation.
Heat Dissipation Holes
: Multiple Heat Dissipation Holes Can Help the Motor Dissipate Heat and Prolong Its Service Life.
Application
This Electric Outboard Motor Is Suitable for Small Ships with Different Materials Within 16.4 Feet in Length, Such As Inflatable Boats, Iron Boats, Plastic Boats, Fiberglass Boats, and Wooden Boats. It Is Widely Used in Fishery, Aquaculture, Outdoor Exploration, Etc.
Maintenance
Complete Machine Maintenance(the Following Time and Date Intervals Are in No Order.)
1.1 Daily Inspection: Whether Screws and Nuts Are Loose.
1.2 Clean the
Dust
on the Surface of the Whole Machine Every 8 Hours.
1.3 Check the Connection of High-voltage Line Every 100 Hours.
2. Keep the Product Clean
2.1 Clean the Dirt on the Motor Controller Regularly. It Is Forbidden to Spray with Water, and Clean It with a Brush and High-pressure Air.
2.2 Before Starting Each Time, Combustible Materials Around the Controller Must Be Cleaned to Avoid Fire.
2.3 Clean the Sundries in the Cooling System to Avoid Blocking the Air Duct. the Cooling Fan Should Be Cleaned Regularly to Avoid Overheating and Mechanical Damage.
Common Faults and Troubleshooting
1. If the Starting Handle Is Found to Be Powered off During Operation, Please Check Whether the Positive and Negative Poles of the Battery and the Whole Set of Power Cables Are Connected Properly.
2. Always Check Whether the Controller Screws Are Loose.
3. the Gearbox Should Be Replaced with Gear Oil for Three Months.
Notes
1. Before Installing and Using the Electric Outboard Motor, Please Read the Entire Manual Carefully As This Will Help You Understand the Electric Outboard Motor and Its Operation.
2. Please Wash the Propeller with Clean Water After Sailing in Sea Water or Turbid Water.
3. Please Store the Electric Outboard Engine in a Dry and Ventilated Place Away from Direct Sunlight.
4. Please Allow Slight Color Difference Caused by Shooting Light and 1-3 Cm Error Caused by Manual Measurement and Make Sure You Don't Mind Before Buying.
Customer Note:
This product does not include batteries and chargers
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Jul 10, 2024 at 22:08:52 PDT, seller added the following information: