Inboard M1 Electric Skateboard Remote Control (controller)

Description

This is a used and working Inboard M1 Electric Skateboard remote.  It includes the original mini-USB charging cable (not pictured)
The remote is in good condition and tested to be working.  The lever and trigger feel smooth.
According to the user manual, the instructions for pairing a remote to a board is as follows...
1. Turn on the remote
2. Using three fingers, tap twice on the Inboard log under the M1 board
3. Hold your fingers on the logo until the board and remote are paired.
Note: In my experience, this usually takes 3 or 4 tries to get it to work.  But once it's done, it's done forever.