LED 20/24 Pin PSU ATX SATA HDD Power Supply Tester Checker Meter PC Computer

Description

LED 20/24 Pin PSU ATX SATA HDD Power Supply Tester Checker Meter PC Computer
Product Description
100% Brand new and high quality
This new ATX power tester can be tested: 4PIN/6PIN/8PIN, HDD Power Interface/, FLOPPY, 20PIN/24PIN powerful.
New ATX Power Tester Power Tester 20PIN/24PIN SATA Power Interface Test Utility Computer Repair Tool.
Note: Now many power supplies do not have -5v voltage, so -5v light is not normal, there are some Great Wall and other high-quality power -5v can be bright!
PG: It is the POWER GOOD signal that shows the current power.
The Power Good signal is abbreviated as P.G. or P.OK signal. When the switching power supply is started, if the AC input voltage is within the rated range, and the DC output voltage of each channel reaches the minimum allowable detection value (+5V output is 4.75V or more), the PG circuit is delayed after 100ms to 500ms delay. A "Power OK" signal is issued (P.OK is HIGH). When the power AC input voltage falls below the safe operating range or the +5V voltage falls below 4.75V, the power supply will send a “power failure” signal (P.OK is low). P.G. signal is very important, even if the power of the DC output is normal, if there is no P.G. signal or P.G. signal timing is incorrect, it will cause the computer can not boot.
Power Tester Instructions
1. Power supply to be tested
.
2. Insert the 24P (20P) plug to be tested into the corresponding 24P (20P) socket of the power tester
.
3. Check whether the right seven lights (+3.3, -12V, PG, +5VSB, +12V, -5V, +5V) are bright, all bright is good
.
4. Insert the HDD plug to be tested into the HDD socket of the power tester and check if the two lights on the left (+12, +5V) are bright and bright.
5. Pull out the HDD plug from the power tester, and then insert the P4 (P6/P8) plug into the corresponding P4 (P6/P8) socket, and check if the left lamp (+12V) is bright and bright.
6. Pull out the P4 (P6/P8) plug from the power tester, and then insert the FLOPPY (floppy) plug into the corresponding FLOPPY socket, and check if the two lights on the left (+12V, +5V) are bright and bright.
7. Pull out the FLOPPY plug from the power tester, and then insert the SATA plug into the corresponding SATA socket. Check if the three lights on the left (+12V, +3.3V, +5V) are bright and bright.
Package includes
1* LED 20/24 Pin PSU ATX SATA HDD Power Supply Tester
Payment
We only accept Paypal payments
！
Please make sure your shipping address is correct
！
Shipping time
All items will be shipped out by airmail from China/Hong Kong/Taiwan
。
Standard SpeedPAK from China/Hong Kong/Taiwan to United States is about 7 to 14 business days
。
Economy Shipping/Economy SpeedPAK/Standard SpeedPAK from China/Hong Kong/Taiwan to worldwide is about 7 to 35 business days
。
If you didn't receive the product after ebay Estimated delivery time
，
please contact with us
，
We will help you solve the delivery problem
。
Customs Duties
Customs duties,taxes and charges are not included in the item price or shipping charges
。
If you need to pay customs duties when you receive the goods (we are not responsible)
。
And you can check with your country's customs office to konw how much tariff you need to pay
。
Return Policy
A
：
If you are not satisfied with the product after receiving the product
，
please contact us.We could offer refund
，
and refund request is available only requests within a week after parcel received & returning the item as the same condition as received
。
B
：
We ensure our products work normally before post
，
If you find that the product is damaged or not working properly after receiving the product
，
and you need to do is sending us the clear pictures to show it damaged or not working properly
，
We will solve the problem of reissuing or refunding
。
Feedback
A
：
If you receive the product
，
the use is very good
，
please give us 5 star positive feedback
！
B
：
We will leave a positive feedback to everyone who has complete the transaction and leave us positive feedback also
。
C
：
If you we are not satisfied with the product or service
，
please contact us and don't give us negative or natural feedback
！
please contact us before you sumbit your evaluation ! we will give you a satisfactory solution
！
Contact us
Our working time(Hong Kong time)
：
Monday to Saturday 9:00 am to 18:00 pm
（
Sunday is the holiday time
）。
All emails will be answered with in 1-2 business day. If you do not receive our reply
，
please kindly re-sent your email , and we will reply to you as soon as possible
！