SANSI Swimming Pool Light RGB LED Bulb Underwater Decor Lights & Remote

Description

【Remote Control & 3 Timer Options】The LED submersible lights can be easily controlled with RF remote control up to 100FT/30m in the air and 3.3FT/1m underwater. Submersible lights can remote control multi lights and you don't need to point at the lights to remote. With 3 timer options,the pool lights can be set on/off for 2h, 4h, 6h.
【13 LEDs, 16 Color Changes & 3 Light Modes】With 13 built-in high quality LEDs, the underwater lights will be much brighter and more vivid than others. It has 16 colors, 5 levels of brightness adjustment, 3 color changing modes.Ruyilam waterproof pond lights lights give you more choices and give you a variety of color options.
【IP68 Waterproof Design & Updated Suction Cups】Ruyilam inground pool lights feature a sealed housing design and are IP68 certified. The structure of submersible LED light is upgraded from 2 small external magnets and 2pcs suction cups to a large built-in magnet and 4 pcs suction cups. With updated suction cups, pool lights can be used in both air and underwater on flat and smooth surface.
【Multiple Application Scenarios】These pool led lights are suitable for various lighting scenarios and can be used indoor or outdoor places.The LED pool lights can be placed in Halloween Pumpkin, Lantern Decor, Pool, Vases, Weddings, Aquarium, Fish Tank, Pond, Fountain, Party, Hallways, Graduations, Holiday Decorations, etc.
IP68 Waterproof LED Pool Lights
The underground pool light meets the IP68 waterproof rating. It features a double shell sealed design made of highly waterproof ABS material combined with a external silicone seal. No more worrying about water getting into the pool lights.
QUICK TIPS:
1.Please do not move or remove the seal ring. Make sure the seal ring is in the correct position, especially keep the inner seal ring stayed in the groove.
2.Please twist up tightly, twist the light until the cap can't be twisted any further, to make it fully waterproof before putting it into water. (
Very important ！！！ Please note and use it in a correct way
)
3.Please dry the lights first before replacing batteries, in case that water will go inside and cause failure to lights. After put in batteries, please tighten it firmly before placing it into water. Do not place it in the water without being tightened or twisted.
4.It’s better not to use it in hot water or steam, because the vapour will go into lights and damage the components, which will lead the light stop working. The operating temperature is 0~40 ℃.
Easy to Install
1. Unscrew the cover of the pond light counterclockwise.
2. Insert 3 AAA batteries in a correct way.
Put the negative end of the battery to the spring and the positive end to the another end.
3. Tighten the cover of the pool light clockwise. Tear off the plastic divider on the remote control and press the ON button to start using the light.
More Stable Magnet & Suction Cups
The structure of submersible LED light is upgraded from 2 small external magnets and 2pcs suction cups to a large built-in magnet and 4 pcs suction cups.
The larger magnet and 4 pcs suction cups provide stronger and stabler absorption. No more worries of the pool lights fall off.
Please press the suction cups against the flat surface to ensure that the air is evacuated. Please note that these silicone suction cups are not suitable for use in inflatable swimming pools.
Upgraded RF Remote Control
The pool lights work with radio frequency remote, which can easily remote control max 100FT/30m in air, 3.3FT/1m in water.
It has a very strong signal and one remote can control multiple lights at the same time without the need to aim the lights.
You can easily use the remote to change the color or adjust the brightness at a distance.
On Sep 20, 2022 at 22:01:36 PDT, seller added the following information: