Submersible LED Lights Inground Pool Pond Decoration Waterproof Lighting +Remote

Description

Magnets Submersible Lights Remote Control Extra Bright Color Changing Underwater Lights
Lights for Ponds Pool Boat, with Suction Cups 164ft Remote Range, IP68 Full Waterproof, Battery Operate
Are you look for an innovative design submersible lights which have updated function like magnets and suction cups?
Are you looking for really full waterproof, durable and reliable pond pool lights?
Are you tired of using bad quality led submersible lights?
You’re lucky today, our submersible LED Light will bring you a definitely different using experience!
Waterproof Lights for Pool, Fountain
These LED lights for pool are made of with Waterproof IP68 design, could be used in the water and worked well. No worry about it while used in swimming pool, pond, bathtub, fountain, etc.
16 Different Bright Colors Available
These LED lights each come with remote controller to choose one of 16 colors and 4 changing modes to get the atmosphere suited to your party or home style. Led RGB lights are Battery Powered, simple and safe to use, you just need to drop them to the place needed them.
Multiple Uses Show:
Perfect for all kinds of home decoration, work like a charm
Here is the 2nd generation submersible lights.
►
Increase
●Increased 16 Colors;
●Increased 4 timer options;
●Increased 3 Levels of brightness adjustable;
●Increased 13 LEDs, 3 times brighter than 10 LEDs, and more vivid;
●Increase to 35-40 hours display time, durable than other lights only last 6 hours;
●Increase further and deeper remote range to 98-160ft (in air), others only support 2ft;
●Increase further and deeper remote range to 10-16.4ft (underwater), others only support 1ft;
●Increased magnets;
●Increased suction cups; Enlarge the suction cups from to 25mm, more powerful to hold on the light.
Please Note:
There are some misunderstandings we need to clear.
For Waterproof
Please make sure the sealing ring is undamaged, and properly stays in the groove.
Please twist the light until it can not be twisted any further, to make it fully waterproof before putting underwater.( Very Important!!! otherwise, it will leak)
Please dry the lights first before replacing the batteries. Because the water outside lights may drop into lights and keep inside the battery case, it will damage the components, and defeat the lights. ( Very Important!!!)
Please keep the remote dry from water, because it’s not waterproof, water will make it stop working.
For Battery
Please don’t use the bad quality battery, it will influence the brightness of the light and the working life, and it will harm the light bulb too.
For long time use, we recommend using rechargeable batteries to save batteries and money.
Because some rechargeable batteries are a little bit big to insert into the battery case, so it doesn't connect properly, the light will not light up. If the lights don't light up once you insert all 3 batteries, please move the battery to make them connect properly.
We don’t suggest using a carbon core battery, because it's lightweight, and will make the lights floating.
For Remote Control
Please keep the remote dry from water, because it’s not waterproof.
Please long-press the button "ON" on the remote for about 2 seconds to activate all the lights. After turning on, no need to long-press, the light will be very sensitive to react to what you set. ( very important!!!)
For underwater use, please keep the remote within 10FT/3M-16.4FT/5M, because water will largely absorb the signal, and weaken the signal to the lights.
In the air, the remote range can reach 164FT/50M and more.
We have already improved the signal system, it has a further remote range and better reaction which can work for 16.4FT/5M and more underwater.
·
For Suction Cups (2nd generation)
Can be used in both air and underwater on flat and smooth surfaces. (not rough surface)
Please clean the surface before attaching, make sure there is not any stuff between the surface and suction cup, especially remember to remove the lubricant like shower cream, moss, etc. ( very Important!!!)
We already enlarged the suction cup to a larger size and tighter absorptivity, it's competent to hold lights under 10-16.4ft/3-5m underwater.
For Magnets
It’s perfect for any iron place which can be attracted by the magnet, especially a rough vertical surface, but not for a smooth vertical surface, please use a suction cup instead.
The magnet is strong, but it's better to apply on a pure iron surface, alloy may reduce the absorb effect.
In a word, use incorrect way is very important, hope you will not miss a good product and seller.
If you have any questions, please don't hesitate to reach out, we are always here providing prompt response and solutions to you within
24 hours.
On Jul-05-21 at 03:50:23 PDT, seller added the following information: