ZS Multi Surface Car Dash Mount fits TomTom GO 730 730t

Description

ZS Multi Surface Car Dash Mount fits TomTom GO 730 730t
This product data sheet is originally written in English.
ZS Multi Surface Car Dash Mount fits TomTom GO 730 730t
ZS Multi Surface Suction Car Dashboard Mount for the TomTom GO 730 & 730t Traffic (SKU 10263) SKU: 10263 ZS Multi Surface Suction Car Mount for the TomTom GO 730 & 730t Traffic. This low level suction car mount has a PU coated suction cup which will grip to most flat surfaces within your vehicle. NO NEED FOR ADDITIONAL DISCS OR PADS. Use the ZS Multi Surface arm directly on the dashboard, console or window. How does it work? The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, is NOT adhesive so it can be remove and re-applied - Great for multi vehicle drivers. The PU sucker is on a lever release arm which ensures a reliable vacuum grip. This sucker only requires a minimum flat area of just 70mm diameter to use. So versatile, neat enough for small cars and perfect for larger vehicles such as Motorhomes, MPVs, Lorry Cabs, Transit Vans. If your vehicle has a deep dash or steep sloping windscreen, the ZS Multisurface Mount allows you to bring your satnav closer to you for easier viewing. Tilt & swivel adjustment to avoid glare. Arm length approx 60mm - low level design, neat and unobtrusive. How to apply your ZS Multi Surface Mount. Select your chosen position, ensure it is clean, dust free. Remove the protective film from the sucker. Position the ZS arm pull down the lever to expel the air and create the vacuum. Give it a wiggle to ensure it's holding firm then insert your TomTom. To remove; Just lift the lever and pull on the release tab to break the vacuum. The mount can now be lifted away. NOTE: Remember to pull the lever up and release the vacuum before removing. Tugging the arm will result in damage. Washable; Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry. Once the PU has reactivated (becomes tacky again) it's ready to use. Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments. View the Video below to see how the ZS Multi-surface Mount works. Note - may not show the holder for your device. BuyBits Multi Surface Mount - YouTube Video will open in a new window [isdntekvideo] .ytvideo { margin:.5em auto; max-width:480px; font-family:arial; text-align:center; position:relative; min-height:120px; overflow:hidden; background-color:#555; } .ytvideo p { position:absolute; margin:0; color:white; background-color:rgba(0,0,0,.5); } .ytvideo .yt_hd { font-size:16px; width:100%; height:28px; line-height:28px; text-align:left; top:0; left:0; padding-left:10px; overflow:hidden; } .ytvideo .yt_ft { font-size:11px; width:100%; bottom:0; left:0; } .ytvideo img { display:block; max-width:100%; border:0; } .ytvideo a:after { content:"\A0BA"; position:absolute; width:60px; height:50px; left:0; top:0; right:0; bottom:0; margin:auto; border:0; border-radius:10px; color:white; background:rgba(0,0,0,.6); font-size:24px; line-height:50px; cursor:pointer; } .ytvideo a:hover:after { background:#CC181E; }
ZS Multi Surface Car Dash Mount fits TomTom GO 730 730t
ZS Multi Surface Suction Car Dashboard Mount for the TomTom GO 730 & 730t Traffic (SKU 10263)
SKU: 10263
ZS Multi Surface Suction Car Mount for the
TomTom GO 730 & 730t Traffic.
This low level suction car mount has a PU coated suction cup which will grip to most flat surfaces within your vehicle.
NO NEED FOR ADDITIONAL DISCS OR PADS.
Use the ZS Multi Surface arm directly on the dashboard, console or window.
How does it work?
The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, is NOT adhesive so it can be remove and re-applied - Great for multi vehicle drivers.
The PU sucker is on a lever release arm which ensures a reliable vacuum grip.
This sucker only requires a minimum flat area of just 70mm diameter to use.
So versatile, neat enough for small cars and perfect for larger vehicles such as Motorhomes, MPVs, Lorry Cabs, Transit Vans.
If your vehicle has a deep dash or steep sloping windscreen, the ZS Multisurface Mount allows you to bring your satnav closer to you for easier viewing.
Tilt & swivel adjustment to avoid glare.
Arm length approx 60mm - low level design, neat and unobtrusive.
How to apply your ZS Multi Surface Mount.
Select your chosen position, ensure it is clean, dust free.
Remove the protective film from the sucker.
Position the ZS arm pull down the lever to expel the air and create the vacuum.
Give it a wiggle to ensure it's holding firm then insert your TomTom.
To remove;
Just lift the lever and pull on the release tab to break the vacuum. The mount can now be lifted away.
NOTE:
Remember to pull the lever up and release the vacuum before removing. Tugging the arm will result in damage.
Washable;
Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry. Once the PU has reactivated (becomes tacky again) it's ready to use.
Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments.
View the Video below to see how the ZS Multi-surface Mount works.
Note - may not show the holder for your device.
BuyBits Multi Surface Mount - YouTube
Video will open in a new window
[isdntekvideo]
×
×
×
×
×
×
×
Buy now and save!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.
We accept payment via PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
Thank you for shopping with us on eBay!
Additional Information
No additional information at this time
Ask seller a question
You might also like
Waterproof TOUGH CASE for the Apple iPhone 4S
Waterproof Motorcycle Fork Stem Powered Mount Kit for Iphone 4S fits 17.5-20.5mm
30 Pin Male to Female Dock Extender Extension Adaptor for the Iphone 4S
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© BuyBits Ltd
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
eBay integration
by
ZS Multi Surface Suction Car Dashboard Mount for the TomTom GO 730 & 730t Traffic (SKU 10263) SKU: 10263 ZS Multi Surface Suction Car Mount for the TomTom GO 730 & 730t Traffic. This low level suction car mount has a PU coated suction cup which will grip to most flat surfaces within your vehicle. NO NEED FOR ADDITIONAL DISCS OR PADS. Use the ZS Multi Surface arm directly on the dashboard, console or window. How does it work? The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, is NOT adhesive so it can be remove and re-applied - Great for multi vehicle drivers. The PU sucker is on a lever release arm which ensures a reliable vacuum grip. This sucker only requires a minimum flat area of just 70mm diameter to use. So versatile, neat enough for
SKU
10263
Mounting Type
Multisurface
EAN
5052010009288
MPN
10263
Brand
BuyBits
Manufacturer Part Number
N/A
Type
Dash Mount
Colour
Black